AIR TANK

Viking Horns Train Horn Kit vs a Battery Train Horn: The 170 dB Claim, the Tank, and the Install

7 min read
Pickup tailgate under a steel rail viaduct with a chrome air train horn kit beside a battery-powered train horn.

Viking Horns train horn kits are sold with a bold number on the box: 170 dB. A battery train horn takes a different route, with no tank, no compressor wiring and no install. Here is what the Viking kits actually include, why the 170 dB claim does not hold up, and how the two approaches compare once you get to the install.

What Viking Horns sells: the kit lineup

Viking Horns kits are full onboard-air systems: a horn, a 12V compressor, a steel air tank, a solenoid valve, a pressure switch, fittings and a horn button. When we checked on 11/17/2026, the vikinghorns.com address redirected to a domain-sale page instead of a store, so the specs below come from the marketplace listings and archived product pages that are still circulating.

Viking kit Trumpets Compressor Tank Advertised dB
V101C-3/4008B 4 (13-3/4, 11-1/2, 9-1/4, 7-3/4 in) One 150 PSI 1.5 gal 149 dB
V103C-6-12/311-1B 3, black One 200 PSI, 100% duty cycle 5 gal 170 dB
V103C2X-6-12/311-1B 3 (16-1/2, 14-1/2, 12-1/2 in) Two 200 PSI, 100% duty cycle 5 gal 170 dB

The single-compressor V103C kit was listed at $454.46 on Viking's own store in a July 2024 archive, and the dual-compressor version has been listed around $489 on third-party marketplaces. That is parts only. Install labor is on you or a shop.

The listings are not always consistent with each other, which matters when you are trying to plan a build. For the single-compressor V103C, one version of the official description says "12 volts 150 PSI" and 3 gallons, while the included-parts list and the marketplace listing say 200 PSI and 5 gallons. The pressure switch is printed as 170/150 PSI in one place and 170/200 PSI in another. If you buy one, confirm the exact model number and what is in the box with the seller.

The 170 dB claim: why the number does not add up

None of the Viking listings say at what distance 170 dB was measured, and a decibel rating without a distance cannot be checked or compared. Sound from a single source drops about 6 dB every time you double your distance from it, according to the Federal Highway Administration's noise measurement handbook. The same horn can be "150 dB" at a few inches and far less a few feet away.

Now compare it to a real locomotive horn. HornBlasters reports that the Nathan Airchime K5LA, a genuine cast locomotive horn, measured 149.4 dB at 3 feet under proper test conditions. For a three-trumpet truck kit to hit 170 dB, it would need to beat that by about 20 dB. A common rule of thumb is that about 10 dB sounds twice as loud to the human ear, so 20 dB would mean roughly four times as loud as an actual locomotive horn. That is not happening with 12V compressors and a 5 gallon tank.

Viking's own archive also undercuts the number. The same 311 trumpet set used in the 170 dB V103C kits shows up in a smaller V103C-5/311-1B kit that was rated at 152 dB. Same trumpets, an 18 dB difference on paper. The smaller V101C kit is rated at 149 dB, again with no test distance.

For a regulatory reference point, federal rules require a lead locomotive horn to produce between 96 and 110 dB(A) measured 100 feet in front of the locomotive (49 CFR 229.129). That is a very different number from the one on the box because it is measured at a real distance. We break down how these inflated ratings get made in fake train horn decibel ratings explained.

The fair way to read any horn rating, ours included, is to ask what distance it was measured at and treat a number above the K5LA's measured figure with suspicion.

The tank: what 5 gallons gets you, and what it costs in space

Viking's bigger kits are built around stored air. The compressor fills the tank, the pressure switch shuts it off at the top of its range, and when you press the horn button the 1/2 inch solenoid dumps that air through the trumpets. A 5 gallon tank at up to 200 PSI holds a lot of air, and that is the real strength of these kits: long, steady blasts.

  • V101C (1.5 gallon): the switch keeps the tank between 120 and 150 PSI. Fine for short taps; a long blast drains it fast.
  • V103C (5 gallon): one 200 PSI compressor and much more stored air for longer blasts.
  • V103C2X (5 gallon): two 200 PSI compressors to refill the same tank faster.

The trade-off is space. The 5 gallon tank on the dual-compressor kit measures 21 inches long and 10-1/2 inches tall with its bracket. Each compressor is 10-3/4 x 4 x 6-3/4 inches, and the three-trumpet horn assembly is 19-1/4 x 18 x 7-1/2 inches. Realistically, that means a full-size pickup, an RV or a large SUV, with the tank under the bed or along a frame rail. A tank also collects moisture and needs to be drained, especially in cold weather.

Four-trumpet battery train horn with a cordless tool battery attached and no air tank

The battery train horn approach: no tank at all

A battery train horn puts the compressor, valve and trumpets in one housing and runs on a cordless tool battery you probably already own. There is no tank to fill, drain or mount. The horn makes its air when you press the remote.

The Extreme Series Train Horn for Milwaukee® 18v Battery is our loudest model in that format. It is rated at 150 dB, which puts it in the same class as the K5LA's measured close-range figure rather than claiming to beat it by 20 dB. It ships fully assembled with a 160 ft wireless remote, and a long-range remote rated up to 2,000 ft is an available upgrade. It runs on any Milwaukee® M18™ battery, which is sold separately. The black version lists at $335 on sale (regular $430), and chrome and red are $355.

The same Extreme Series design is available for other cordless battery platforms, including DeWalt® 20V MAX™, Ryobi® ONE+™, Makita® LXT™, Bosch® 18V and more:

Where a big-tank kit still wins is the very long sustained note. A battery horn is at its best on repeated short and medium blasts, and it never has to wait for a tank to refill. When a pack runs low, you swap in a charged one.

The install: a weekend of work vs snapping on a battery

A Viking kit is a real install, not a bolt-on. Based on what ships in the box and the install notes in the kit reviews, here is what the job involves:

  • Mount the tank and compressor(s). Find a protected spot, drill or use existing holes, and bolt everything down. The dual-compressor kit has two compressors to place.
  • Mount the horn. The 19-1/4 inch wide trumpet assembly needs clear space under the hood, behind the grille or under the bed.
  • Plumb the air line. Run 1/2 inch hose from the tank to the solenoid and horn, and seal every brass fitting with thread tape to avoid slow leaks.
  • Wire it. Each compressor should have its own fused feed and a relay rather than running off the horn button. Plan for heavy-gauge wire, then route the horn button into the cab.
  • Test and fill. Filling a 5 gallon tank from empty takes several minutes, so leak-test before you button it all up.

For a first-timer, budget a weekend. If a shop does it, labor goes on top of the kit price.

Makita Train Horn - Dual Drill Horn - BossHorn

A battery horn skips every one of those steps. Slide a charged pack on and press the remote. Nothing taps into the truck's wiring, and the horn moves from the pickup to the boat, the UTV or the tailgate in seconds. The trade-off is that it is not permanent and does not fire from a button on the dash. Our comparison of a train horn gun vs an air tank and compressor kit goes deeper on that choice.

Warranty, support and which to choose

Viking's archived warranty policy offered a 12-month limited warranty for the original purchaser plus a 30-day satisfaction guarantee. With the official site no longer showing a store, support now runs through whichever seller you buy from, so check their return terms before you order.

Pick a Viking kit if you want a permanent horn on one full-size truck or RV, a dash button, and long sustained blasts from a 5 gallon tank, and you are comfortable wiring compressors and relays or paying a shop. Ignore the 170 dB claim when you compare it to anything else.

Pick a battery train horn if you already own cordless tool batteries, want zero install, need one horn for several vehicles, or drive something where a 21 inch tank will not fit.

Whichever you choose, keep your stock horn working for the road. A train horn belongs on private property, the trail, the water, events and emergencies.

FAQ

Is a Viking Horns kit really 170 dB?

No independent test supports it, and the listings give no measurement distance. A real Nathan K5LA locomotive horn measured 149.4 dB at 3 feet, and Viking's own archive rated a kit with the same trumpets at 152 dB.

What size tank comes with a Viking kit?

The V101C uses a 1.5 gallon tank with a 150 PSI compressor. The V103C kits use a 5 gallon tank with one or two 200 PSI compressors. Some listings disagree on tank size, so confirm with the seller.

Can a battery train horn replace a Viking tank kit?

For portable use, yes. It needs no tank, wiring or install and moves between vehicles. It will not give you a dash button or the very long sustained note of a 5 gallon tank.

How long does a Viking kit take to install?

Plan on about a weekend for a first install: mounting the tank, compressors and horn, running 1/2 inch air line, and wiring fused, relayed power to each compressor.

Back to Guides